fbpx

Cape Coral Tile Roof Replacement and Balcony Repair

Our office received a phone call recently from a homeowner who’s two-story home had been damaged as a result of Hurricane Irma. Upon inspection, it was determined that a complete tile roof replacement would be the best solution to repair the home’s roof structure. Our roofing division assisted our customer throughout the entire process from start to finish, and they received their new tile roof in record time. Additionally, our restoration team re-sealed the balcony of the home, as it had been damaged as well during the storm.

Special Materials:

  • Tile Manufacturer: EAGLE
  • Style (Profile): CAPISTRANO
  • Color: Weathered Terracotta Flashed
  • Drip Edge Color: BROWN

Re-Roof Scope Of Work:

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Balcony Sealant Repair Scope Of Work:

Provide labor and material to complete the following:

  • Apply 100% silicone commercial Tropical roof coating over the entire balcony surface including around the base of each stone balcony columns.
  • Seal all roof to balcony transitions.
  • WARRANTY: SFR will provide a 10-year warranty on labor and material on this sealant.
Emergency Roof Repair

Emergency Roof Repair On A Fort Myers Home

Our office was contacted by a Fort Myers resident recently who was in need of an emergency roof repair. A tree had fallen on their home’s roof during a recent thunderstorm over the weekend. We received the call over the weekend at 9:00 am on Sunday morning and mobilized to the customer’s residence to remove the tree and install a tarp. Currently, the homeowner is awaiting insurance approval to proceed with the complete roof repair. We will update this case study accordingly when the project progresses!

Scope Of Work

Emergency Tarp Services

  • Remove fallen tree from home
  • Install tarp over affected areas
  • All tarps secured with tied sandbags, rope, or RS cap nails as needed.

Punta Gorda Tile Roof Replacement

Our roofing division was contacted by a Punta Gorda homeowner that had a tile roof that experienced roof damage as a result of Hurricane Irma. Upon inspection, it was determined that the customer’s home required a tile re-roof. Our team mobilized and removed the old roofing structure and installed the new roof in accordingly. In addition to replacing the roof on this home, our team also installed a complete gutter system for the home’s new roof.

Special Materials

Tile Manufacturer: Boral

  • Style (Profile): Villa 900
  • Color: Arbor Green
  • Drip Edge Color: White

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and/or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application along with manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 135LF of new white 6″ aluminum seamless gutters.
  • Install up to (5) downspouts, (2) splash guards, (3) miters to match existing layout.

 

Speed Bumps For Uptown At Liberty Park

We were recently hired by Uptown At Liberty Park to install a series of speed humps to slow down traffic moving through the facility. The installation of these speed humps aided in a reduced speed through their parking lots, and also helped to keep residents safe!

Cape Coral Home Roof Replacement & Exterior Repaint

Our office was recently contacted by a homeowner in Cape Coral Florida in need of a roof repair. The home had received a roof overhaul prior to the owner purchasing the home in 2014. The roof’s skylight located over their dining room had begun to leak, prompting the call. The homeowner was so pleased with our work, that she contracted our painting division to repaint the exterior of her home to complete it’s new look! The final product turned out amazing.

Special Materials

  • GAF Timberline
  • Paint Manufacturer: Sherwin Williams
  • Paint Products Primer: Loxon Masonry Conditioner
  • Stucco Surfaces: SW Super Paint Satin
  • Doors: SW Super Paint Semi-Gloss

Scope Of Work For Shingle Re-Roof

Provide permit, labor, and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of Resisto Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys, closed valley detail.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking. Color to be selected by Building Representative.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.

Scope Of Work For Exterior Repaint

  1. Trench around perimeter of home 1 to 3 inches.
  2. Pressure wash exterior free of dirt and foreign material.
  3. Apply a consistent coat of masonry sealer to stucco surfaces.
  4. Remove and patch any rotted T-1-11 throughout exterior walls.
  5. Caulk where necessary around doors, windows, and J Channel. Seal masonry cracks, as needed with elastomeric patching compound.
  6. Apply a consistent coat of finish paint to stucco walls and exterior side of entry and garage doors. Colors selected by owner.
  7. Seven year limited labor and materials warranty issued by Sherwin Williams.

Fort Myers Home Receives Tile Roof Replacement

Throughout Southwest Florida, we are still finding an abundance of roofing structures that experienced damage from Hurricane Irma. Most homeowners aren’t able to spot the signs of a damaged roof which can include uneven lines on the roof, lifted shingles or tile, leaks, cracks, or even granule loss. When you contact our roofing division, you will receive a complimentary roof inspection that will outline any issues with your home’s roof, while educating of your options for resolution moving forward.

This particular Fort Myers home’s roof was damaged as a result of Hurricane Irma. Our office was contacted, and we mobilized to diagnose and ultimately repair the issue for this great homeowner. Additionally, our team repaired both the gutters and soffit at the time the new roof was installed. We’re blessed for the opportunity to serve our great community and thankful for our great clients!

Special Materials

  • Tile Manufacturer: Boral
  • Style (Profile): Estate
  • Color: Gold Dust
  • Drip Edge Color: White

Scope Of Work

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 270LF of new white (match existing) 6″ aluminum seamless gutters.
  • Install up to (6) downspouts, (5) splash guards, (7) miters, (11) end caps to match existing layout.

Bonita Springs Tile Roof Replacement

Following damage sustained to their roof from Hurricane Irma, this homeowner contacted our roofing division for repairs. Working together, we were able to obtain a new roof for the customer and repair within record time! We’re thankful for the opportunity to help our fellow Floridian’s in any way we can, as we prepare for the upcoming hurricane season.

Special Materials

  • Tile manufacturer: Eagle
  • Style (Profile): Capistrano
  • Color: Light Gray Range
  • Drip Edge Color: White

Scope Of Work

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Shingle Roof Replacement In North Fort Myers Florida

We’re proud to showcase another shingle roof replacement recently completed on a customer’s home in North Fort Myers Florida. We were contacted by this homeowner with a request to replace their existing roofing structure after our company completed  a roof replacement on their neighbor’s home. We’re blessed for the referral, and for the opportunity to serve the roofing needs for both of these great families.

Special Materials

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
  • Resisto Peel & Stick, self-adhered shingle underlayment
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HD shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work

Provide permit, labor and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of Resisto Peel & Stick, self-adhered shingle underlayment, applied direct to plywood over entire roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 5yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

North Fort Myers Shingle Roof Replacement

Our roofing division was recently contacted by a homeowner in North Fort Myers Florida requesting an estimate to replace their old, worn shingle roof. Upon inspecting the roofing structure, our team worked with the homeowner throughout the entire process from start to finish, ensuring an exemplary roof replacement experience. Our customer was so pleased with our work, they referred their neighbor to First Service, who is currently getting a roof replacement as well!

Special Materials

  • Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HD shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work

Provide permit, labor and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  5. Furnish and install 26-Gauge rolled valley metal in a mill finish to all valley locations.
  6. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  7. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  8. Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking.
  9. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  10. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  11. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  12. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo

Another Fort Myers Home Tile Roof Replacement Complete

Our roofing division is hard at work serving the roofing needs of residential roofing clients throughout Southwest Florida. This beautiful home in Fort Myers Florida, unfortunately sustained roof damage courtesy of Hurricane Irma. Upon inspecting the existing roofing structure, it was determined that a complete tile re-roof was needed in order to service the needs of our customers. Additionally, we also removed the existing gutters and installed a new gutter system at the time of the roof replacement.  Their new Terra Cotta roof provides a nice contrast of color to the home, while more importantly protecting those who live in it from our harsh Florida weather. We’re thankful for the opportunity to serve the roofing needs of our great customer, and look forward to serving any additional painting or restoration needs they may have in the future!

Special Materials

  • Tile Manufacturer: Boral
  • Style (Profile): Estate
  • Color: Terra Cotta
  • Drip Edge Color: Tan

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis. See below.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application along with manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 215LF of new tan 6″ aluminum seamless gutters.
  • Install up to (6) downspouts, (2) splash guards, (6) miters to match existing layout.