fbpx

Fort Myers Tile Roof Replacement & Repaint

Our office recently had the pleasure of serving the needs of a wonderful customer within the Gateway Greens community in Fort Myers Florida. Upon being contacted our team visited the residence to perform a roof inspection. With extensive damage on the roof, it was later determined that Hurricane Irma was the root cause of these damages and in order to properly repair, the home would need to receive a complete roof replacement. Once the project was approved we went to work removing the existing tile roof. Following the removal of the tile and installation of the appropriate underlayment, our team installed Boral’s Barcelona 900 tile in their gold dust color. Our team completed the roof and installed a new aluminum seamless gutter system as well to finish the project.

After our roofing team was complete, our painting division mobilized and completed a full exterior repaint using Sherwin Williams paint products. The end result turned out amazing and our customer’s selections beautifully transformed the exterior of this home!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Barcelona 900
  • Color: Gold Dust
  • Drip Edge Color: White

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Installation Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 60LF of new white 6″ aluminum seamless gutters.
  • Install up to (3) downspouts to match existing layout.
  • Jobsite will be cleaned of all work-related debris upon completion.

Exterior Repaint:

  • PAINT MANUFACTURER: SHERWIN WILLIAMS PAINT PRODUCTS
  • PRIMER: LOXON MASONRY CONDITIONER
  • STUCCO SURFACES: SW SUPER PAINT SATIN
  • DOORS: SW SUPER PAINT SEMI-GLOSS
  1. TRENCH AROUND PERIMETER OF HOME 1 TO 3 INCHES.
  2. PRESSURE WASH EXTERIOR FREE OF DIRT AND FOREIGN MATERIAL
  3. APPLY A CONSISTENT COAT OF MASONRY SEALER TO STUCCO SURFACES
  4. CAULK WHERE NECESSARY AROUND DOORS, WINDOWS, AND J CHANNEL. SEAL MASONRY CRACKS, AS NEEDED, WITH ELASTOMERIC PATCHING COMPOUND
  5. APPLY A CONSISTENT COAT OF FINISH PAINT TO STUCCO WALLS AND EXTERIOR SIDE OF ENTRY & GARAGE DOORS

 

North Fort Myers Roof Replacement

Our roofing team was recently called to this North Fort Myers property to perform a residential roof inspection. Upon inspection, we found the roof to have numerous areas of damage and it was later determined that a complete roof replacement would be needed to properly address and fix the homes issues. Once approved, our roofing division went to work removing the existing roof to make way for the customer’s new Boral Barcelona 900 tile in their sterling color. After the roof was complete, our team also installed new 6″ aluminum seamless gutters to complete the project. This project turned out great and our homeowner couldn’t be happier with their new roof from First Service!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Barcelona 900
  • Color: Sterling
  • Drip Edge Color: White

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide (2) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 50LF of new white 6″ aluminum seamless gutters.
  • Install up to (2) downspouts, (3) splash guards, (1) miters to match the existing layout.
  • Jobsite will be cleaned of all work-related debris upon completion.

Lehigh Acres Shingle Roof Repair

Our office was recently contacted to perform a roof inspection on a Lehigh Acres home. The homeowner was from out of town and purchased the home, with their insurance requiring the roof to be prepared. Upon inspection it was determined that the home would require a complete roof replacement to properly repair. Our team went to work and completed a thorough repair to the roof, closely matching the shingles until a complete replacement can take place. Once final approval is received from the insurance company, our team will carry out the complete shingle roof replacement.

Scope of Work:

Provide labor and materials to complete the following roof repair:

  1. Remove up to 15 shingles in affected area(s)
  2. Replace roof underlayment and or flashing
  3. Install new shingles that match as close as possible in color and style

Upon completion, the job site will be cleaned of all work-related debris.

First Service will provide a one-year workmanship warranty on this repair.

 

Shingle Re-Roof For Client In Cape Coral Florida

Our roofing division recently completed a roof replacement for a building located in Southwest Cape Coral. Upon inspection we found several areas on both the first and second story levels of this apartment building that we determined to have been damaged by Hurricane Irma. Our team made temporary repairs until the complete roof replacement could take place. Once approved our team removed the existing roofing structure and installed GAF’s Timberline HDZ shingles along with a new seamless aluminum gutter system. This project was completed on time and the building owner and tenants can rest assured that the structure is protected by a new roof installed by First Service!

Special Materials:

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick
  • APOC Peel & Stick
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work:

Provide permit, labor, and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of APOC Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Provide labor and material to complete the following:

  1. Remove and dispose of the existing gutters and downspouts.
  2. Install up to 215LF of new sandtone 6″ aluminum seamless gutters on the first story.
  3. Install up to 50LF of new sandtone 6″ aluminum seamless gutters on the second story.
  4. Install up to (6) 1 story downspouts, (3) 2 story downspouts, (2) splash guards, (4) miters to match the existing layout.
  5. Job-site will be cleaned of all work-related debris upon completion.

Cape Coral Asphalt Shingle Roof Replacement

Our office recently had the great pleasure of helping a Cape Coral homeowner with roof repairs for damaged sustained from Tropical Storm Eta. Upon inspection, we determined that to properly repair this homes roof a shingle roof replacement would be needed. Once approved, our roofing division went to work removing the existing roof structure to then install a new shingle roofing system using TAMKO’s Heritage shingles along with their moisture guard underlayment. Now that their home’s roof is protected by a roof from First Service, the homeowner plans to upgrade and replace her windows in preparation for our upcoming hurricane season.

Special Materials:

Manufacturer: TAMKO HERITAGE – Shingles TAMKO MOISTURE GUARD – Underlayment

Scope Of Work:

Provide permit, labor, and materials to complete the following: Shingle Re-Roof

Heritage Laminated Asphalt Shingles

  • Remove roof covering and underlayment.
  • Re-nail decking to local hurricane mitigation code with Magnum Zinc Coil Nails – .113″x2 3/8″ ring shank.
  • Install Resisto peel & stick underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install new lead flashing around all plumbing stacks.
  • Install a new 130mph Architectural Asphalt shingle roof system as per manufacturer specifications.

Condo Association Roof Replacement, Gutter Installation, and Re-Paint

Located in beautiful Cape Coral Florida, the Victoria Harbor Condominium association had contacted our office to repair damage that their facility experienced during Hurricane Irma. Following an inspection it was determined that the storm had caused extensive damage to the waterfront roofing structure resulting in a need for a complete roof replacement. Once approved, our roofing division went to work removing the existing roof and replacing it with new Eagle Malibu tile in their Riviera color. Once completed, our gutter and painting divisions stepped in to help give the building a beautiful new look. The finished product turned out amazing and our client couldn’t be happier with how everything turned out!

Special Materials

  • Tile Manufacturer: Eagle
  • Style (Profile): Malibu
  • Color: Riviera
  • Drip Edge Color: White

Re-Roof Scope Of Work

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (2) year workmanship warranty on tile application.
  • Provide manufacturers warranties.
  • Fabricate and install 24-gauge Kynar painted metal to all parapet walls for metal roof repair.
  • Cap to match building layout.
  • Attach with 5v neoprene screws. 1 foot on center along each side. This metal cap will provide a lifetime of protection to the top of the parapet walls.

Provide labor and material to complete the following gutters:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 25LF of new white 6″ aluminum seamless gutters on the first story.
  • Install up to 135LF of new white 6″ aluminum seamless gutters on the second story.
  • Install up to (4) 2-story downspouts, (1) 1-story downspout, (5) miters to match the existing layout.
  • Jobsite will be cleaned of all work-related debris upon completion.

 

Residential Roof Replacement For Ft. Myers Home

Unfortunately, when Hurricane Irma visited Southwest Florida in 2017 it caused widespread damage to roofs throughout the area. This home’s tile roof was no exception. Following a roof inspection, our team determined that the damage to the home was significant and warranted a need for a complete tile roof replacement to take place. Once accepted by insurance, we mobilized and went to work removing the existing roof to make way for the homeowner’s new Eagle Malibu tile in their royal palm colorway. Once completed, this tile really helped to increase the home’s curb appeal. Our client can now rest easy knowing that their new tile roof from First Service will protect the home for years to come!

Special Materials:

  • Tile Manufacturer: Eagle
  • Style (Profile): Malibu 2516
  • Color: Royal Palm
  • Drip Edge Color: Grey

Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Emergency Roof Repair and Roof Replacement For Cape Coral Home

Our office recently had the pleasure of assisting a great homeowner in Cape Coral Florida. Upon inspection, or residential roofing division found the home’s roof to be in extremely poor conditioning following Hurricane Irma requiring an emergency repair and ultimately a roof replacement. Once approved, we went to work removing the existing roofing structure to prepare the home for its new roof. Our team installed GAF’s 130mph rated Timberline HDZ shingles, along with the appropriate vent systems and leak barrier.

As a GAF master elite certified roofer, we take pride in providing our customers with some of the best roofing materials available in today’s market. With a roof installed by First Service and protected by GAF products, this homeowner can rest easy knowing that their home’s roof will weather our SWFL storms for years to come!

Special Materials:

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick
  • APOC Peel & Stick
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work:

Provide labor and materials to complete the following emergency repair:

  1. Remove shingles in affected area(s).
  2. Replace roof underlayment and/or flashing.
  3. Install new shingles that match as close as possible in color and style.
  4. Upon completion, the job site will be cleaned of all work-related debris.
  5. First Service will provide a one-year workmanship warranty on this repair.

Provide permit, labor, and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of APOC Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Recent Cape Coral Shingle Roof Replacement Project

Our office was contacted recently to inspect the shingle roof of this Cape Coral home. The roofing structure was found to be in extremely poor conditioning after Hurricane Irma and it was determined that a roof replacement would be needed to properly repair the roof. Once approved our team went to work removing the existing roofing structure. Once removed we installed GAF’s weather watch leak barrier peel & stick, along with their 130 MPH rated timberline HDZ shingles. Once our roofing team completed the roof replacement, we also installed new aluminum 6″ gutters along with downspouts.

This homeowner can now rest assured that their home is protected by the best shingles on the market, installed by one of Southwest Florida’s most dedicated roofing companies!

Special Materials:

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick
  • APOC Peel & Stick
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work:

Provide permit, labor, and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of APOC Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking. Color to be selected by Building Representative.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Provide labor and material to complete the following:

  1. Remove and dispose of the existing gutters and downspouts.
  2. Install up to 130LF of new white 6″ aluminum seamless gutters.
  3. Install up to (4) downspouts, (3) splash guards, (4) miters to match existing layout.
  4. Jobsite will be cleaned of all work related debris upon completion.

 

 

Tile Re-Roof & Gutter Installation For Fort Myers Home

Our office was recently called to this Verandah community home that had been damaged during Hurricane Irma and had active leaks in both the kitchen and master bathroom. Following our initial roof inspection, it was determined that a complete tile roof replacement was needed to properly repair the home. Once approved, our team got to work removing the existing roof structure before installing Boral’s Saxony 900 split slate tile in their coconut white antique color. This tile not only provided the aesthetic look the homeowners desired, but also the proper level of protection needed to protect the residence from future storms and harsh weather conditions. In addition to the roof replacement, our roofing team also installed a new 6″ aluminum seamless gutter system on the first story of the home.

The final product turned out amazing, and we are thankful for the opportunity to serve this wonderful homeowner.

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 190 LF of new Mastic Sandtone .39 6″ aluminum seamless gutters on the first story.
  • Install up to (4) downspouts, (7) splash guards, (8) miters to match existing layout.
  • Jobsite will be cleaned of all work related debris upon completion.