We’re proud to showcase another shingle roof replacement recently completed on a customer’s home in North Fort Myers Florida. We were contacted by this homeowner with a request to replace their existing roofing structure after our company completedĀ a roof replacement on their neighbor’s home. We’re blessed for the referral, and for the opportunity to serve the roofing needs for both of these great families.
Special Materials
- GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
- Resisto Peel & Stick, self-adhered shingle underlayment
- GAF Pro-Start starter shingle
- 130 mph GAF Timberline HD shingles
- GAF Seal A Ridge Hip & Ridge Cap Shingles
- GAF Cobra Rigid Vent3 Exhaust Vent system
Scope Of Work
Provide permit, labor and materials to complete the following:
- Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
- Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
- Re-nail existing plywood roof deck to meet current Florida Building Code.
- Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
- Furnish and install (1) layer of Resisto Peel & Stick, self-adhered shingle underlayment, applied direct to plywood over entire roof deck.
- Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
- Install 26 GA galvalume kitchen and dryer vents.
- Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
- Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
- Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking.
- Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
- Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
- Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
- First Service will provide 5yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuardĀ® logo.