fbpx

Tile Re-Roof & Gutter Installation For Fort Myers Home

Our office was recently called to this Verandah community home that had been damaged during Hurricane Irma and had active leaks in both the kitchen and master bathroom. Following our initial roof inspection, it was determined that a complete tile roof replacement was needed to properly repair the home. Once approved, our team got to work removing the existing roof structure before installing Boral’s Saxony 900 split slate tile in their coconut white antique color. This tile not only provided the aesthetic look the homeowners desired, but also the proper level of protection needed to protect the residence from future storms and harsh weather conditions. In addition to the roof replacement, our roofing team also installed a new 6″ aluminum seamless gutter system on the first story of the home.

The final product turned out amazing, and we are thankful for the opportunity to serve this wonderful homeowner.

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 190 LF of new Mastic Sandtone .39 6″ aluminum seamless gutters on the first story.
  • Install up to (4) downspouts, (7) splash guards, (8) miters to match existing layout.
  • Jobsite will be cleaned of all work related debris upon completion.

Exterior Repaint For Fort Myers Home Completed

Our painting division recently completed an exterior repaint project for a homeowner in Fort Myers Florida. Our roofing division was in the area completing a tile roof job across the street from this homeowner’s residence, and they were so impressed they contacted our company to repaint the exterior of their home. Once our client completed their color selections, we went to work prepping the home for paint prior to completing the final finish. The end result turned out great, and our customer couldn’t be happier!

Special Materials:

  • Paint Manufacturer: Sherwin Williams Paint Products
  • Primer: Loxon Masonry Conditioner
  • Stucco Surfaces: SW Duration Satin
  • Doors: SW Duration Semi-Gloss

Scope Of Work For Exterior Repaint:

  1. Trench around perimeter of home 1 to 3 inches.
  2. Pressure wash exterior free of dirt and foreign material, no bleach used, as requested.
  3. Apply one coat of masonry sealer to stucco surfaces.
  4. Caulk where necessary around doors and windows. Seal masonry cracks, as needed, with elastomeric patching compound
  5. Apply one coat of SW Duration Satin Paint, using brush and roll technique, to stucco walls, ceilings, bands, and trim.
  6. Apply one coat of SW Duration Semi-gloss paint to the exterior side of entry and garage doors.
  7. A 10-year limited labor and materials warranty issued by Sherwin Williams.

Shingle Roof Replacement For Port Charlotte Home

Our roofing division recently had the great pleasure of serving the roofing needs of a customer in Port Charlotte Florida. Following a roof inspection, we determined the damage to the existing roof to warrant a complete shingle roof replacement. We removed the existing shingle roof and installed GAF’s weather watch leak barrier and underlayment along with their 130mph rated Timberline HDZ shingles. As a GAF master elite contractor, we take pride in installing the best roofing materials available. Our client can rest easy knowing that their home is protected by the best shingle system available today installed by First Service!

Special Materials:

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
  • APOC Peel & Stick, self-adhered shingle underlayment
  • GAF Pro-Start starter shingles
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work:

Provide permit, labor, and materials to complete the following shingle re-roof:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of APOC Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Provide labor and material to complete the following gutter installation:

  1. Remove and dispose of the existing gutters and downspouts.
  2. Install up to 170LF of new white 6″ aluminum seamless gutters.
  3. Install up to (5) downspouts, (1) splash guards, (4) miters to match existing layout.
  4. Jobsite will be cleaned of all work related debris upon completion.

Fort Myers Florida Tile Roof Replacement

We recently had the great pleasure of serving a wonderful customer in the Paseo community of Fort Myers. Our office was contacted to perform an inspection for a roof repair and upon inspection we found extensive damage to the roof that was determined to have been caused by Hurricane Irma. In order to properly repair the roof a complete tile roof replacement was required. Our roofing division quickly carried out the removal of the existing roof structure and installed new Eagle Capistrano tile in their boca cream color. Once complete we also installed a new 6″ seamless aluminum gutter system. The final product turned out great and our customer can rest easy knowing that their residence is protected with an expertly installed roofing system from First Service!

Special Materials:

  • Tile Manufacturer: Eagle
  • Style (Profile): Capistrano
  • Color: Boca Cream
  • Drip Edge Color: Brown

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal. Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 260LF of new brown 6″ aluminum seamless gutters.
  • Install up to (4) downspouts, (2) splash guards, (8) miters to match the existing layout.
  • Jobsite will be cleaned of all work-related debris upon completion.

Estero Tile Roof Replacement & Gutter Installation

Our office recently had the great pleasure helping a homeowner with their roofing claim. After completing a roof inspection, it was determined that the existing roofing structure was damaged as a result of Hurricane Irma resulting in the need for a complete roof replacement. Once the project was approved, our team worked with the client to carry out the necessary roof replacement. We installed Boral’s Villa 900 roofing tile in their burnt mission colorway. This tile accented the home beautifully and dramatically transformed its curb appeal. Once the roofing structure was complete, we installed new 6″ tan aluminum seamless gutters along with downspouts and splash guards to properly route rain off of the clients new roof.

Special Materials

  • Tile Manufacturer: Boral
  • Style (Profile): Villa 900
  • Color: Burnt Mission
  • Drip Edge Color: White

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.

Provide manufacturers warranties.

Gutter Installation Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 230LF of new tan 6″ aluminum seamless gutters.
  • Install up to (6) downspouts, (2) splash guards, (6) miters to match existing layout.

Cape Coral Shingle Roof Repair & Window Replacement

Our office was recently contacted by a customer seeking a roofing company to perform a shingle roof repair. What initially started off as a simple roof repair also led to a window replacement project. With our companies vast experience conducting remodels, build outs, and general contracting capabilities, we jumped at the opportunity to help this great customer. In addition to performing the roof repair, our team replaced 6 windows with 2 of them being arch top eyebrow styled. An issue with egress came up when replacing the bedroom window as the house was constructed in 1993 and the egress codes had changed a few years later. Our team enlarged the existing window opening in this room to install a larger window to meet the existing egress code. With a newly repaired roof and new windows, our customer can rest easy knowing their home was expertly repaired by our dedicated team at First Service!

Scope Of Work:

Provide permit, labor, and materials to complete shingle repair:

  • Removed shingles in affected areas up to 1 square from the eave to the bird box.
  • Replaced roof underlayment.
  • Install new shingles that match as close as possible in color and style.
  • Wall flashings were reused when salvageable. If they were not, the stucco was neatly cut to remove existing flashings.  New wall flashings were installed as well as stucco.  The walls were repainted to match the existing stucco as close as possible.
  • Jobsite and materials cleaned after completion.

Provide permit, labor, and materials to perform the window replacement:

  • Remove and install six new impact windows in two locations. Three in living room, one with archtop, 4 total windows.  One in guest bedroom with archtop, 2 total windows.
  • Patch exterior stucco and interior drywall as needed from installation of windows.
  • Install replacement screens.
  • Touch up paint and texture for stucco and drywall to match as close as possible.

Gateway Greens Community Home Roof Replacement

Our office recently had the pleasure of serving the roof repair needs of a wonderful customer in Fort Myers Florida. The home, located within the Gateway Greens community had experienced roof damage as a result of Hurricane Irma and the homeowners contacted First Service in search of a quote. Upon arrival, we performed a roof inspection and determined that this home’s tile roof had experienced damage that warranted the need for a complete tile roof replacement. Once approved, our expert team removed the existing roofing structure and replaced with Boral’s Estate White Antique roofing tiles. Not only did this tile slightly change the aesthetic look of the home, but it also aided in providing peace of mind to our customers knowing that their home’s roof is finally repaired and protected from the harsh weather elements that Florida is known for. Once the roof was complete, our team installed a new gutter system on the home to properly deflect rain off of the homes new roof.

We love how this project turned out and and thankful for the opportunity to exceed our customer’s expectations!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Estate
  • Color: Coquina White Antique
  • Drip Edge Color: White

Roof Replacement Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 255LF of new white 6″ aluminum seamless gutters.
  • Install up to (7) downspouts, (7) splash guards (3 of which are oversized), (8) miters to match existing layout.
  • Closed in two bird boxes and installed a new rain sensor.
  • Jobsite will be cleaned of all work-related debris upon completion.

Recently Completed Bonita Springs Roof Tile Replacement

Our roofing team recently completed a roof replacement for a beautiful home in Bonita Springs Florida. Following an inspection, it was determined that our customer’s tile roof was damaged as a result of Hurricane Irma requiring a complete roof replacement and gutter installation. Once approved, our team removed the existing roofing structure on the home and proceeded to carry out a roof replacement using Boral’s Saxony 900 Slate Smoke Black Antique tiles. These premium roofing tiles will help protect the residence from storms for years to come, while also providing a clean aesthetic to this spectacular home. Once our customer’s roof was completed, we installed new 6″ aluminum seamless gutters onto the first story of the home as well. We would like to thank our wonderful client for the opportunity to serve their tile roofing needs, and look forward to servicing their roof in the future should a need arise!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Saxony 900 Slate
  • Color: Smoke Black Antique
  • Drip Edge Color: White

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Install Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 295LF of new white 6″ aluminum seamless gutters on the first story.
  • Install up to (7) downspouts, (8) splash guards, (15) miters to match existing layout.
  • Jobsite will be cleaned of all work related debris upon completion.

Gulf Harbour Yacht & Country Club Home Roof Replacement

Our roofing division recently had the pleasure of serving a wonderful homeowner within the Gulf Harbour community in Fort Myers Florida. This particular home had experienced damage as a result of Hurricane Irma and required a complete tile roof replacement to properly repair. In addition to the re-roof, we also installed a new gutter system for the home. Our customer chose Boral Tile’s Saxony 900 Split Slate tile in their Coconut White Antique color. This tile beautifully accented the home and instantly provided a spectacular curb appeal.

Following the completion of the project, the homeowner also elected to have our team paint the shutters to match the garage on the home. We love how this project turned out, and our customer can rest easy knowing that their residence is protected with a new roof installed by First Service!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Saxony 900 Split Slate
  • Color: Coconut White Antique
  • Drip Edge Color: White

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Gutter Installation Scope Of Work:

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 440LF of new white 6″ aluminum seamless gutters with wedges on the first story.
  • Install up to (12) downspouts, (13) splash guards, (27) miters to match existing layout.
  • Jobsite will be cleaned of all work-related debris upon completion.

Paint Scope Of Work:

Provide permit, labor, and materials for the below mentioned project:

  1. Clean Florida shutters of all dirt and debris
  2. Lightly sand Florida shutters
  3. Paint all 10 Florida shutters with super paint and exterior satin to match front garage

 

Residential Roof Replacement For Estero Home In The Cascades Community

Our roofing division recently had the great pleasure of serving the roofing needs of a client within the Cascades Community in Estero Florida. Following a comprehensive roof inspection on the home, it was determined that the damage that the home sustained from Hurricane Irma warranted a need to replace the homes roofing system. The customer contacted First Service and contracted our roofing division to carry out the roof replacement along with a gutter installation in the front of the home to match its existing layout. Our team completed the roof repair in record time using Boral’s Barcelona 900 tile in their Irving Blend colorway. Upon completion of the project, our customer was thrilled with the final product!

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Barcelona 900
  • Color: Irving Blend
  • Drip Edge Color: White

Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application.
  • Provide manufacturers warranties.

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 80LF of new white 6″ aluminum seamless gutters.
  • Install up to (2.5) downspouts, (2) splash guards, (4) miters to match existing layout.