A homeowner in Cape Coral Florida recently contacted our office to schedule a roof inspection to look for damage on their roof. Upon inspecting the customer’s roof, we found damaged that was ultimately determined to be caused by Hurricane Irma. We worked with the customer to help them obtain a new roof through Elite claims, and proceeded to carry out the contracted work agreed upon. Our roofing division removed the existing roofing structure and installed new 130 mph rated GAF Timberline HDZ shingles in their place. The final product turned out great, and our customer can rest assured that their home’s new roof will protect them for many storm seasons to come.
Special Materials:
- GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
- Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment
- GAF Pro-Start starter shingle
- 130 mph GAF Timberline HDZ shingles
- GAF Seal A Ridge Hip & Ridge Cap Shingles
- GAF Cobra Rigid Vent3 Exhaust Vent system
Scope Of Work:
Provide permit, labor and materials to complete the following:
- Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
- Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
- Re-nail existing plywood roof deck to meet current Florida Building Code.
- Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
- Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
- Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail.
- Install 26 GA galvalume kitchen and dryer vents.
- Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
- Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
- Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking.
- Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
- Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
- Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
- First Service will provide 2yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.
