fbpx
Veteran Owned & Operated Company
  • Contact Us: (239) 652-5784

Category Archives: Roofing

Cape Coral Asphalt Shingle Roof Replacement

Our roofing division was contacted to inspect a shingle roof in Cape Coral Florida for damage. The roof had experienced damage from Hurricane Irma and it was determined that a roof replacement was required. We sprung into action and were able to remove the existing roofing structure, and replace with GAF 130mph rated Timberline HDZ shingles. In addition to the new roof, this beautiful home also received a new seamless gutter system to complete the project.

Special Materials

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
  • Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work

Provide permit, labor and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking. Color to be selected by Building Representative.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Provide labor and material to complete the gutter system:

  1. Install up to 45LF of new white 6″ aluminum seamless gutters on front of house.
  2. Install up to (2) downspouts, (1) miters to match existing layout.

Shingle Roof Replacement For A Cape Coral Home

Our office was contacted to inspect a home’s 23 year old roofing structure. Upon inspection, it was determined that the existing roof had a number of leaks and required a complete shingle roof replacement. As our roofing division completed the home’s re-roof, we also reinstalled fascia and soffit around the front doorway and left side of the home. Loose fascia was secured around the entire home, and the drip edge and fascia that tied into the walls was resealed. We also reinstalled the gutter on the left corner of the home and sealed all cuts in the drip edge in the customer’s gutter ends. Our customer can rest easy knowing that their home is protected by GAF’s 130 MPH rated Timberline HDZ shingles!

Special Materials

  • GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
  • Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment
  • 26 GA – 16″ – Mill (50′) galvalume valley metal
  • 26 GA galvalume kitchen and dryer vents
  • GAF Pro-Start starter shingle
  • 130 mph GAF Timberline HDZ shingles
  • GAF Seal A Ridge Hip & Ridge Cap Shingles
  • GAF Cobra Rigid Vent3 Exhaust Vent system

Scope Of Work

Provide permit, labor and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HDZ shingles, nailed with (6) nails per shingle, to plywood decking.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

Tile Roof Replacement For Estero Home

Our roofing division was recently contacted by a homeowner who’s home had been damaged during Hurricane Irma. Upon inspecting their existing roof structure, it was determined that the client’s home required a complete tile roof replacement. Once approved, our roofing teams mobilized to remove the client’s existing tile roof, and install a new Boral tile roof. The project was completed in an efficient manner, working around our Southwest Florida summer weather, and both the client and ourselves are ecstatic with the results! Our client can now rest assured that their home is adequately prepared for both this year’s and future storm seasons.

Special Materials:

  • Tile Manufacturer: Boral
  • Style (Profile): Villa 900
  • Color: New Southern Blend
  • Drip Edge Color: Cream

Re-Roof Scope Of Work:

Provide permit, labor, and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.
shingle roof repair

Cape Coral Shingle Roof Repair

At First Service, we regularly serve the roofing, painting, and restoration needs of property management companies throughout Southwest Florida . We were recently contracted to make repairs to a multifamily unit requiring a shingle repair for a small leak in the roof. Our roofing division mobilized and remedied the issue for our client in record time. With storm season in full swing here in Southwest Florida, it is imperative to ensure that your facilities roof structure is free of issues. If you suspect a roof leak, or would like to make sure that your roof is ready for Florida’s famous summer weather, contact our office today to schedule a free roof inspection.

Scope Of Work

Provide Labor and Materials To Complete The Following Roof Repair:

  1. Remove shingles in affected area(s) at power mast where previous repair was performed
  2. Replace roof underlayment as needed
  3. Install new shingles that match as close as possible in color and style
  4. Repair missing shingles over specified unit

Warranty: First Service will provide a one-year workmanship warranty on this repair

Residential Shingle Roof Replacement and Repaint For Cape Coral Home

This homeowner selected First Service to replace a section of their homes roof and we so pleased with the service received, that they hired our company to repaint the exterior of their home as well. Both our painting and roofing divisions worked together to service the needs of our customer’s Cape Coral home and we are thrilled with the end result. One of the many benefits of working with our company is the ability to structure roofing, painting, and restoration under one roof. This allows us to provide both residential and commercial customers a “one stop shop” for property repairs and maintenance.

Special Materials:

  • Manufacturer: TAMKO HERITAGE – Shingles
  • Tamko Moisture Guard – Underlayment
  • Paint Manufacturer: Sherwin Williams
  • Primer: Loxon Masonry Conditioner
  • Stucco Surfaces: SW Super Paint Satin
  • Doors: SW Super Paint Semi-Gloss

Scope Of Work For Shingle Roof Replacement:

Provide permit, labor, and materials to complete the following:

  • Remove roof covering and underlayment.
  • Re-nail decking to local hurricane mitigation code with Magnum Zinc Coil Nails – .113″x2 3/8″ ring shank.
  • Install Whip 100 self-adhered peel and stick underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys, closed valley detail.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install new lead flashing around all plumbing stacks.
  • Install a new 130mph Architectural Asphalt shingle roof system as per manufacturer specifications.

Scope Of Work For Exterior Re-paint:

  1. TRENCH AROUND PERIMETER OF HOME 1 TO 3 INCHES.
  2. PRESSURE WASH EXTERIOR FREE OF DIRT AND FOREIGN MATERIAL
  3. REPAIR STUCCO COLUMN ON LEFT SIDE OF ENTRY
  4. APPLY A CONSISTENT COAT OF MASONRY SEALER TO STUCCO SURFACES
  5. CAULK WHERE NECESSARY AROUND DOORS, WINDOWS, AND J CHANNEL. SEAL MASONRY CRACKS, AS NEEDED, WITH ELASTOMERIC PATCHING COMPOUND
  6. APPLY A CONSISTENT COAT OF FINISH PAINT TO STUCCO WALLS AND EXTERIOR SIDE OF ENTRY & GARAGE DOORS
  7. APPLY A CONSISTENT COAT OF FINISH PAINT USING SPRAY TECHNIQUE TO FASICA AND SOFFIT

Cape Coral Tile Roof Replacement and Balcony Repair

Our office received a phone call recently from a homeowner who’s two-story home had been damaged as a result of Hurricane Irma. Upon inspection, it was determined that a complete tile roof replacement would be the best solution to repair the home’s roof structure. Our roofing division assisted our customer throughout the entire process from start to finish, and they received their new tile roof in record time. Additionally, our restoration team re-sealed the balcony of the home, as it had been damaged as well during the storm.

Special Materials:

  • Tile Manufacturer: EAGLE
  • Style (Profile): CAPISTRANO
  • Color: Weathered Terracotta Flashed
  • Drip Edge Color: BROWN

Re-Roof Scope Of Work:

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Balcony Sealant Repair Scope Of Work:

Provide labor and material to complete the following:

  • Apply 100% silicone commercial Tropical roof coating over the entire balcony surface including around the base of each stone balcony columns.
  • Seal all roof to balcony transitions.
  • WARRANTY: SFR will provide a 10-year warranty on labor and material on this sealant.
Emergency Roof Repair

Emergency Roof Repair On A Fort Myers Home

Our office was contacted by a Fort Myers resident recently who was in need of an emergency roof repair. A tree had fallen on their home’s roof during a recent thunderstorm over the weekend. We received the call over the weekend at 9:00 am on Sunday morning and mobilized to the customer’s residence to remove the tree and install a tarp. Currently, the homeowner is awaiting insurance approval to proceed with the complete roof repair. We will update this case study accordingly when the project progresses!

Scope Of Work

Emergency Tarp Services

  • Remove fallen tree from home
  • Install tarp over affected areas
  • All tarps secured with tied sandbags, rope, or RS cap nails as needed.

Punta Gorda Tile Roof Replacement

Our roofing division was contacted by a Punta Gorda homeowner that had a tile roof that experienced roof damage as a result of Hurricane Irma. Upon inspection, it was determined that the customer’s home required a tile re-roof. Our team mobilized and removed the old roofing structure and installed the new roof in accordingly. In addition to replacing the roof on this home, our team also installed a complete gutter system for the home’s new roof.

Special Materials

Tile Manufacturer: Boral

  • Style (Profile): Villa 900
  • Color: Arbor Green
  • Drip Edge Color: White

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and/or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application along with manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 135LF of new white 6″ aluminum seamless gutters.
  • Install up to (5) downspouts, (2) splash guards, (3) miters to match existing layout.

 

Cape Coral Home Roof Replacement & Exterior Repaint

Our office was recently contacted by a homeowner in Cape Coral Florida in need of a roof repair. The home had received a roof overhaul prior to the owner purchasing the home in 2014. The roof’s skylight located over their dining room had begun to leak, prompting the call. The homeowner was so pleased with our work, that she contracted our painting division to repaint the exterior of her home to complete it’s new look! The final product turned out amazing.

Special Materials

  • GAF Timberline
  • Paint Manufacturer: Sherwin Williams
  • Paint Products Primer: Loxon Masonry Conditioner
  • Stucco Surfaces: SW Super Paint Satin
  • Doors: SW Super Paint Semi-Gloss

Scope Of Work For Shingle Re-Roof

Provide permit, labor, and materials to complete the following:

  1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
  2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
  3. Re-nail existing plywood roof deck to meet current Florida Building Code.
  4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
  5. Furnish and install (1) layer of Resisto Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
  6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys, closed valley detail.
  7. Install 26 GA galvalume kitchen and dryer vents.
  8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.
  9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
  10. Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking. Color to be selected by Building Representative.
  11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
  12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
  13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
  14. First Service will provide 2-year workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.

Scope Of Work For Exterior Repaint

  1. Trench around perimeter of home 1 to 3 inches.
  2. Pressure wash exterior free of dirt and foreign material.
  3. Apply a consistent coat of masonry sealer to stucco surfaces.
  4. Remove and patch any rotted T-1-11 throughout exterior walls.
  5. Caulk where necessary around doors, windows, and J Channel. Seal masonry cracks, as needed with elastomeric patching compound.
  6. Apply a consistent coat of finish paint to stucco walls and exterior side of entry and garage doors. Colors selected by owner.
  7. Seven year limited labor and materials warranty issued by Sherwin Williams.

Fort Myers Home Receives Tile Roof Replacement

Throughout Southwest Florida, we are still finding an abundance of roofing structures that experienced damage from Hurricane Irma. Most homeowners aren’t able to spot the signs of a damaged roof which can include uneven lines on the roof, lifted shingles or tile, leaks, cracks, or even granule loss. When you contact our roofing division, you will receive a complimentary roof inspection that will outline any issues with your home’s roof, while educating of your options for resolution moving forward.

This particular Fort Myers home’s roof was damaged as a result of Hurricane Irma. Our office was contacted, and we mobilized to diagnose and ultimately repair the issue for this great homeowner. Additionally, our team repaired both the gutters and soffit at the time the new roof was installed. We’re blessed for the opportunity to serve our great community and thankful for our great clients!

Special Materials

  • Tile Manufacturer: Boral
  • Style (Profile): Estate
  • Color: Gold Dust
  • Drip Edge Color: White

Scope Of Work

Provide permit, labor and materials to complete the following:

  • Remove existing tile and underlayment and dispose of in accordance with local code.
  • Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
  • Re-nail decking to meet hurricane mitigation code.
  • Install tile underlayment to entire roof surface.
  • Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
  • Install new 26 GA galvalume valley metal in all valleys.
  • Install 26 GA galvalume kitchen and dryer vents.
  • Install 26 GA eave closure metal.
  • Install new lead flashing around all plumbing stacks.
  • Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
  • Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Provide labor and material to complete the following:

  • Remove and dispose of the existing gutters and downspouts.
  • Install up to 270LF of new white (match existing) 6″ aluminum seamless gutters.
  • Install up to (6) downspouts, (5) splash guards, (7) miters, (11) end caps to match existing layout.