Category Archives: Gutters/Soffit Replacement

Our roofing division was contacted by a Punta Gorda homeowner that had a tile roof that experienced roof damage as a result of Hurricane Irma. Upon inspection, it was determined that the customer’s home required a tile re-roof. Our team mobilized and removed the old roofing structure and installed the new roof in accordingly. In addition to replacing the roof on this home, our team also installed a complete gutter system for the home’s new roof.

Special Materials

Tile Manufacturer: Boral

• Style (Profile): Villa 900
• Color: Arbor Green
• Drip Edge Color: White

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

• Remove existing tile and underlayment and dispose of in accordance with local code.
• Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
• Re-nail decking to meet hurricane mitigation code.
• Install tile underlayment to entire roof surface.
• Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA galvalume valley metal in all valleys.
• Install 26 GA galvalume kitchen and dryer vents.
• Install 26 GA eave closure metal.
• Install new lead flashing around all plumbing stacks.
• Install a new tile roof system with foam adhesion and/or two screw fastener application system as per manufacturer specifications.
• Provide five (5) year workmanship warranty on tile application along with manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

• Remove and dispose of the existing gutters and downspouts.
• Install up to 135LF of new white 6″ aluminum seamless gutters.
• Install up to (5) downspouts, (2) splash guards, (3) miters to match existing layout.

 

Throughout Southwest Florida, we are still finding an abundance of roofing structures that experienced damage from Hurricane Irma. Most homeowners aren’t able to spot the signs of a damaged roof which can include uneven lines on the roof, lifted shingles or tile, leaks, cracks, or even granule loss. When you contact our roofing division, you will receive a complimentary roof inspection that will outline any issues with your home’s roof, while educating of your options for resolution moving forward.

This particular Fort Myers home’s roof was damaged as a result of Hurricane Irma. Our office was contacted, and we mobilized to diagnose and ultimately repair the issue for this great homeowner. Additionally, our team repaired both the gutters and soffit at the time the new roof was installed. We’re blessed for the opportunity to serve our great community and thankful for our great clients!

Special Materials

• Tile Manufacturer: Boral
• Style (Profile): Estate
• Color: Gold Dust
• Drip Edge Color: White

Scope Of Work

Provide permit, labor and materials to complete the following:

• Remove existing tile and underlayment and dispose of in accordance with local code.
• Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
• Re-nail decking to meet hurricane mitigation code.
• Install tile underlayment to entire roof surface.
• Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA galvalume valley metal in all valleys.
• Install 26 GA galvalume kitchen and dryer vents.
• Install 26 GA eave closure metal.
• Install new lead flashing around all plumbing stacks.
• Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
• Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Provide labor and material to complete the following:

• Remove and dispose of the existing gutters and downspouts.
• Install up to 270LF of new white (match existing) 6″ aluminum seamless gutters.
• Install up to (6) downspouts, (5) splash guards, (7) miters, (11) end caps to match existing layout.

Our roofing division is hard at work serving the roofing needs of residential roofing clients throughout Southwest Florida. This beautiful home in Fort Myers Florida, unfortunately sustained roof damage courtesy of Hurricane Irma. Upon inspecting the existing roofing structure, it was determined that a complete tile re-roof was needed in order to service the needs of our customers. Additionally, we also removed the existing gutters and installed a new gutter system at the time of the roof replacement.  Their new Terra Cotta roof provides a nice contrast of color to the home, while more importantly protecting those who live in it from our harsh Florida weather. We’re thankful for the opportunity to serve the roofing needs of our great customer, and look forward to serving any additional painting or restoration needs they may have in the future!

Special Materials

• Tile Manufacturer: Boral
• Style (Profile): Estate
• Color: Terra Cotta
• Drip Edge Color: Tan

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

• Remove existing tile and underlayment and dispose of in accordance with local code.
• Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis. See below.
• Re-nail decking to meet hurricane mitigation code.
• Install tile underlayment to entire roof surface.
• Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA galvalume valley metal in all valleys.
• Install 26 GA galvalume kitchen and dryer vents.
• Install 26 GA eave closure metal.
• Install new lead flashing around all plumbing stacks.
• Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
• Provide five (5) year workmanship warranty on tile application along with manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

• Remove and dispose of the existing gutters and downspouts.
• Install up to 215LF of new tan 6″ aluminum seamless gutters.
• Install up to (6) downspouts, (2) splash guards, (6) miters to match existing layout.

Our company contracts with several property managers throughout the state of Florida to serve their maintenance needs. When we were recently contacted by Northland properties to complete regular repairs for this Fort Myers apartment community, we jumped at the opportunity to help! Our teams completed multiple projects ranging from tile roof repairs to soffit repairs, and gutter installation. Below, we will outline the scope of work for these recent repairs, and showcase the results.

Repair Scope Of Work

Provide labor and materials to complete the following tile roof repair:

• Inspect the existing tile around one missing tile to ensure no additional damages.
• Replace roof underlayment and/or flashing as needed.
• Install new tile that match as close as possible in color and style.
• Clean worksite of all work-related debris upon completion.

Scope of work for New 6″ white aluminum seamless gutters along one story front side of the club house building:

• New gutters will be end capped on the left side of the front of the building and end capped on the right side of the front of the building.
• Prep all drip edge and fascia to receive new gutters.
• Stage our ladders and equipment along the landscape of the front side of the building.
• New 6″ white aluminum seamless gutters will be installed on the one-story section of the front side of the club house.
• Install 2 new downspouts.
• Re-work and tie-in two existing downspouts.
• Install 4 inside corners
• Install 2 outside corners
• Install 6 end caps

Our office was recently contacted by a Fort Myers homeowner in need of a roofing inspection for their residence. At First Service, we proudly provide complimentary estimates to properly educate our roofing customers of their options for repair and replacement. This particular roof upon inspection was determined to need replaced, and our roofing division acted quickly to serve the needs of our great customer. Once we had all of the proper materials allocated, we removed the existing roofing material and replaced with a new GAF Weather Watch Mineral-Surfaced Leak Barrier Asphalt Shingle system. In the coming weeks we will be replacing the home’s existing gutter system and repainting the exterior of the home.

Special Materials

• GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment
• Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment
• GAF Pro-Start starter shingle
• 130 mph GAF Timberline HD shingles
• GAF Seal A Ridge Hip & Ridge Cap Shingles
• GAF Cobra Rigid Vent3 Exhaust Vent system

Re-Roof Scope Of Work

Provide permit, labor, and materials to complete the following:

• Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
• Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis.
• Re-nail existing plywood roof deck to meet current Florida Building Code.
• Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
• Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
• Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys, closed valley detail.
• Install 26 GA galvalume kitchen and dryer vents.
• Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish.
• Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
• Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking.
• Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
• Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
• Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
• First Service will provide 5yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

A beautiful home in the Pelican Sound Golf and River Club community, in Estero Florida had sustained roof damage from Hurricane Irma that had gone without repair for some time. After learning of First Service, our company was contacted to inspect the home’s roofing structure and devise a plan for repairs. Ultimately, upon inspection it was determined that the home met the appropriate criteria to warrant a complete tile roof replacement, and our company proceeded to work with our great customer to replace their existing roof. We’re thankful for the opportunity to serve the roofing needs of our great community and look forward to working with our customer again in the near future when we return to install a new gutter system for their home in the coming weeks!

Special Materials

• Tile Manufacturer: Boral
• Style (Profile): Villa 900
• Color: Arbor Green
• Drip Edge Color: white

Re-Roof Scope Of Work

Provide permit, labor and materials to complete the following:

• Remove existing tile and underlayment and dispose of in accordance with local code.
• Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
• Re-nail decking to meet hurricane mitigation code.
• Install tile underlayment to entire roof surface.
• Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA galvalume valley metal in all valleys.
• Install 26 GA galvalume kitchen and dryer vents.
• Install 26 GA eave closure metal.
• Install new lead flashing around all plumbing stacks.
• Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.
• Provide five (5) year workmanship warranty on tile application.
• Provide manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

• Remove and dispose of the existing gutters and downspouts.
• Install up to 225LF of new tan 6″ aluminum seamless gutters.
• Install up to (6) downspouts, (4) splash guards, (6) miters to match existing layout.

This two story home had been damaged during Hurricane Irma and upon inspection, it was determined that replacing the existing tile roof would be needed. Once contracted, our roofing division mobilized and completed the tile re-roof for our wonderful customer. Additionally, we will also be installing a complete new gutter system in the coming weeks, so check back for additional photography of the installation and this beautiful home!

Special Materials

• Tile Manufacturer: Boral
• Style (Profile): Barcelona 900
• Color: Florida Blend
• Drip Edge Color: White

Scope Of Work

Provide permit, labor and materials to complete the following:

• Remove existing tile and underlayment and dispose of in accordance with local code.
• Inspect existing decking. Damaged or deteriorated decking will be replaced on a unit price basis.
• Re-nail decking to meet hurricane mitigation code.
• Install tile underlayment to entire roof surface.
• Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA galvalume valley metal in all valleys.
• Install 26 GA galvalume kitchen and dryer vents.
• Install 26 GA eave closure metal.
• Install new lead flashing around all plumbing stacks.
• Install a new tile roof system with foam adhesion and or two screw fastener application system as per manufacturer specifications.

Provide five (5) year workmanship warranty on tile application. Provide manufacturers warranties.

Gutter Installation Scope Of Work

Provide labor and material to complete the following:

• Remove and dispose of the existing gutters and downspouts.
• Install up to 91LF of new white 6″ aluminum seamless gutters on the first story.
• Install up to 108LF of new white 6″ aluminum seamless gutters on the second story.
• Install up to (10) downspouts, (7) splash guards, (4) miters to match existing layout.