Category Archives: Roofing

Our office was recently contacted by a homeowner in Cape Coral Florida to perform a routine roof inspection. We found normal wear and tear associated with the aged roof and reviewed the options for resolution with the homeowner. Following discussion, we were contracted to replace the existing shingle roof. Once the project commenced, our roofing team removed the existing shingles, underlayment, and addressed any areas needing repair prior to installing the customer’s new roof.

GAF HDZ Shingles in their Driftwood pattern were installed along with the appropriate underlayment and leak barriers. As a GAF certified Master Elite company, we take pride installing some of the best shingles available on the market. These premium shingles are rated up to 130 MPH and are accompanied by GAF’s stellar system plus 50 year non-prorated warranty on any GAF material installed on the roof. Pair that with our 2 year workmanship warranty, and our customer can rest easy knowing that their home is protected from Southwest Florida’s harsh weather environments for years to come!

Roof Replacement Scope Of Work

1. Remove existing layers of shingles, underlayment, fasteners and dispose of in First Service dumpsters.
2. Inspect the condition of existing decking, flashing, and fascia board for their suitability of re-use. Any damaged or deteriorated materials will be replaced on a unit price or time and material basis. See disclaimer.
3. Re-nail existing plywood roof deck to meet current Florida Building Code.
4. Furnish and install (1) layer of GAF Weather Watch Mineral-Surfaced Leak Barrier Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck in all valley and penetration locations.
5. Furnish and install (1) layer of Leak Barrier MS300 Ice and Water Armor Self-Bond Peel & Stick, self-adhered shingle underlayment, applied direct to plywood roof deck.
6. Furnish and install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail.
7. Install 26 GA galvalume kitchen and dryer vents.
8. Furnish and install drip edge fabricated from 26-gauge steel with a baked enamel finish. Standard color to be selected by Building Representative.
9. Furnish and install GAF Pro-Start starter shingle at all eave/rake locations.
10. Furnish and install 130 mph GAF Timberline HD shingles, nailed with (6) nails per shingle, to plywood decking. Color to be selected by Building Representative.
11. Furnish and install GAF Seal A Ridge Hip & Ridge Cap Shingles at all hip and ridge locations. Color to match field shingle color.
12. Furnish and install a GAF Cobra Rigid Vent3 Exhaust Vent system at applicable ridge lines.
13. Furnish and install new lead pipe boots where existing pipes penetrate the roof surface.
14. First Service will provide 2yr workmanship warranty and a GAF SYSTEM PLUS 50 YEAR NON-PRORATED WARRANTY ON ANY GAF MATERIAL ON THE ROOF. Stain Guard algae protection and 10-year limited warranty against blue-green algae discoloration available only on shingles sold in packages bearing the StainGuard® logo.

When roof damage was found during an inspection on this Cape Coral home, our client elected to replace their existing shingle roof. Once contracted, our team went to work removing the existing roof covering and underlayment. Once their old roof was removed and disposed of, our team installed Tamko Heritage Shingles in their Rustic Cedar colorway along with new underlayment to the entire roof surface with the appropriate valley metal, flashing, and vents.

We completed this project in record time, ensuring this home is protected during our inclement summer weather. We would like to take this opportunity to thank our customer for the opportunity to solve their roofing issues, while also giving recognition to our amazing roofing team! Great job!

At First Service, having both a roofing and painting division has its perks! Our customers often engage in both of these services simultaneously to not only protect, but transform their homes.

Recently, this customer located in Cape Coral, Florida contracted our office to perform a roof inspection and provide a quote. Our team was later contracted to replace the worn shingle roof and paint the exterior of the home as it was remodeled. We used Tamko Heritage shingles in their Rustic Black colorway for the roof, and Sherwin Williams paint products for the exterior to help transform this home and provide a modern curb appeal.

Roof Replacement Scope Of Work:

• Remove roof covering and underlayment.
• Re-nail decking to local hurricane mitigation code with Magnum Zinc Coil Nails – .113″x2 3/8″ ring shank.
• Install Resisto peel & stick underlayment to entire roof surface. Install new 26 GA pre-painted drip edge flashing to entire roof perimeter.
• Install new 26 GA – 16″ – Mill (50′) galvalume valley metal in all valleys. Note: We use a closed valley detail. Install 26 GA galvalume kitchen and dryer vents.
• Install new lead flashing around all plumbing stacks. Install a new 130mph Architectural Asphalt shingle roof system as per manufacturer specifications.

Exterior Repaint Scope Of Work:

PAINT MANUFACTURER: SHERWIN WILLIAMS PAINT PRODUCTS PRIMER: LOXON MASONRY CONDITIONER STUCCO SURFACES, CEILINGS: SW DURATION SATIN DOORS: SW DURATION SEMI-GLOSS

1. TRENCH AROUND PERIMETER OF HOME 1 TO 3 INCHES.
2. PRESSURE WASH EXTERIOR FREE OF DIRT AND FOREIGN MATERIAL
3. APPLY ONE COAT OF MASONRY SEALER TO STUCCO SURFACES
4. SEAL MASONRY CRACKS, IF PRESENT, WITH ELASTOMERIC PATCHING COMPOUND
5. INSPECT CAULK AT WINDOWS AND DOORS, IF DETERIORATED REMOVE AND REPLACE AS NEEDED 6. APPLY ONE COAT OF SW DURATION SATIN PAINT, USING BRUSH AND ROLL TECHNIQUE, TO STUCCO WALLS, CEILINGS, FASCIA, SOFFIT, GUTTERS, BANDS & TRIM
6. APPLY ONE COAT OF SW DURATION SEMI-GLOSS PAINT TO THE EXTERIOR SIDE OF ENTRY & GARAGE DOORS

We recently had the pleasure of replacing the tile roof on a beautiful custom home in Fort Myers Florida. Unfortunately, the home’s roof was damaged during Hurricane Irma which warranted a need for repairs to commence and ultimately a full roof replacement. Once approved and contracted, the roofing division at First Service went to work removing and appropriately discarding the existing tile roof and underlayment in accordance with local code. Once the decking was inspected, and replaced where needed we went to work installing new tile underlayment to the entire roof surface along with the appropriate flashing and vents.

Out team proceeded to install the new roof tile that our customer had selected from Boral, which was their Estate-Desert Tan Black-Antique colorway. This beautiful tile not only helps provide structural rigidity, but also showcases an elegant look atop the 7/12 pitch roof! Once completed, we thoroughly cleaned the area and were happy to reveal our client’s new roof. This beautiful roofing system will serve the homeowner for years to come, and will be sure to properly weather our Florida storms.

Our office was contacted by a homeowner in need of a roof replacement for an investment property in Cape Coral Florida. Following an inspection, our team was able to work with the homeowner to provide an exemplary product, service, and price to replace the shingle roof on their rental property. Once contracted, our roofing division went to work removing and disposing of the existing layers of shingles, underlayment, and fasteners from the roof. We then inspected the current condition of the decking, flashing, and fascia board. Items were replaced where needed and we prepared the roof deck for the customer’s new roof.

We then went to work installing new underlayment and GAF Timberline HD Shingles in their Shakewood colorway, along with new 26 GA 16″ galvalume valley metal in all valleys, and the appropriate 26 GA kitchen and dryer vents. The shingles installed on this roofing system from GAF are rated to 130mph and carry GAF’s Golden Pledge 20 year workmanship & material warranty. As one of South Florida’s GAF Master Elite roofing contractor’s, our clients can obtain additional piece of mind knowing that their premium roof is installed by a factory GAF certified contractor.

We would like to thank our wonderful customer for the opportunity to serve their roofing needs, and welcome the opportunity to assist again in the future should a need arise.

Our roofing division was recently contacted to inspect this Bonita Springs tile roof. Upon inspection it was determined that the amount of damage the roof had experienced as a result of Hurricane Irma warranted a need for a complete roof replacement to properly repair. Once approved and contracted our team went to work removing the existing tile and underlayment. After the roof was removed and any deteriorated decking was replaced we installed new 26 GA flashing and valley metal throughout the roof, along with the appropriate vents for the kitchen and dryer.

New Boral Saxony Villa tile in their pinto blend colorway was installed to the roof which carries a thorough manufacturer warranty. This beautiful roof will not only positively accent the home, but will serve the needs of this homeowner for years to come protecting their residence from our harsh Southwest Florida weather conditions!